Machine is new, only made 5 bales for commissioning Key Features & Capabilities Fully automatic cross‑wrapping (bale remains intact) Three wrapping programs (to optimize film consumption) Supports heavy / long bales and challenging materials Control & electric...
4 units available (£35,000.00 each ex-works loaded) top deck have 120mm holes bottom deck has 60mm holes 4kw electric motor drive full working order Transport Dimensions: 5.5 m long x 2.4 m wide x 1.75 m high Spares available
Year 2005 Hours 1815 Spec: Diesel powerpack Hydraulic Drive Overband Magnet and frame Chevron Belt Hydraulic jack lags 5th wheel coupling Cabin.
Complete RDF/SRF baling line with wrapping system. Capable of handling 24 tonnes per hour and processing SRF, this baler would also be able to tie the SRF bales for the European market. Presona Press force - 500 Kilo Newtons Press Force Cross Wrap Model...
In Feed Conveyor 1400mm wide Material levelling drum 1400mm transfer conveyor c/w side extensions 9 bay double sided picking station 1500mm wide belt 45720mm long overband magnet and support frame support frames bay frames and concrete walls
SID Manufactured Danfoss Hydraulics Siemens PLC's Unit powered an SID XR350 2 X Hugglunds Motors Variable displacement pumps Hydraulic heater and cooler Installed in 20ft Container
Year 2004 Feed hopper at tail end of inclined conveyor section with heavy-duty impact bars under belt at feed point. Inclined feed conveyor up onto horizontal section for manual selection. The conveyor will be fitted with a 1200 mm wide Chevron belt being supported by...
Built in 2013 Manufacturer EMS Throughput +25T/hr Description: - Heavy duty feed hopper Heavy duty incline conveyor 12M X 1.3m Chevron belt Heavy duty Trommel Length 9.5M X 2.4M Diameter 40mm bolt in mesh, cleaning brushes Oversize Conveyor 9M X 1.3M EMS Drum...
New Belt Width - 500mm Belt Length - 3,800mm Discharge Height - 2,500mm Length - 4,400mm Width - 930mm Height - 2,900mm New Motor Size - 0.75kW Fully Refurbished
The processing capacity varies from 15 to 100 tons per hour, depending on the input material and the configuration of the rotors and knives. Input hopper 4.3 m L x 2.6 m W x 460 mm H Twin shafts with 8 off knives per shaft. Cutting table dimensions: 2160 mm L x 2570...
Click or press on the button to open our enquiry form and we’ll come back to you asap with answers, options, prices and lead times. Or Call 01792 702173